Yes... You have finally found THE WORLDS ONLY small diameter (7/16 OD) Interface Meter for your 1/2" ID or 12 mm ID wells to detect floating or sinking hydrocarbons down to 1/2 mm or 1/200 of a foot. 5/8 diameter probe is also available. WATER SENSITIVITY CONTROL Infra-red refraction is used to detect liquids and conductivity is used to detect the water. For heavy viscous oils, detect water sensitivity quickly by increasing the external sensitivity control. For high conductivity water (brine) decreasing the sensitivity control prevents bridging so a moist probe is not detected as being in water. While all water level meters have a water sensitivity adjustment, there isn't another interface meter on the market with this feature except the INT Interface Meter.
FLUID SENSOR CONTROL State of the art electronics will also correct for a severely damaged optical sensor* BEST RESOLUTION & ACCURACY
1/100 ft or 1mm & 5x more accurate than white tapes with a Kynar or Polyethylene jacket Measure LNAPLs & DNAPLs with pressure proof stainless steel probe.
HOOK & CABLE PROTECTOR
PROVEN & RUGGED OPTICAL SENSOR Two separate sensitivity controls for the water sensing and fluid sensing circuits allow the user complete control over the performance of the instrument. Operating Principle: Water Sensing Conductivity Hydrocarbon Sensing Infra-red refraction
For pricing please contact us. |