Floating Hydrocarbons Bailer

Easily separates and removes floating hydrocarbons from water surface
Simple, inexpensive - just clean and reuse
Threaded components allow ease of assembly and replacement
Long lasting yet economical PVC and Stainless Steel construction

Kilman ElectriLoc's PetroBailer provides a means of separating and removing floating hydrocarbons from the water surface.

Petro-Bailer (Patent Pending) is constructed of PVC and stainless materials. All connections are threaded for ease of assembly and replacement of an individual component. The 12" hydrophobic filter allows for separation of the floating hydrocarbon with the collection being provided in a 0.2 gal resevoir (larger resrvoirs available upon request).

To Insure Proper Installation:
Measure and record the static water and product level in the well.
To calculate the length of suspension cord, subtract 1.4 foot from the static water level reading. This will place the hydrophobic filter media centrally, assuming that an Enviro Cap has been utilized at the surface to suspend the bailer.
Attach the suspension cord to the Petro-Bailer and lower it slowly into the monitor well. The water displaced by the bailer will quickly equalize and product separation will begin. THe hydrophobic membrane can be submerged without allowing the acceptanve of water. However, if the water level extends above the membrane, the hydrostatic pressures will exceed the electrostatic pore strengths and allow minimal water passage.
After each field event the static water and product level in the well should again be recorded and the Petro-Bailer reset to the new field conditions

The Petro-Bailer provides a fast, inexpensive and simple device for removal of floating hydrocarbons from wells.

For pricing please contact us.