Clearview Disposable Medical Grade PVC Bailers
| Sizes: 3.33" x 3' |
Volume: 5100mL |
Benefits:
Fast sink rate without additional weights - PVC naturally sinks in water,
due to its specific gravity, relative to water.
No weights to restrict flow of sample entering and exiting bailer.
Easy pour top and bottom emptying device
PVC is very ridgid, stays straight, never bending or distorting under normal care. (This is very important for the smaller diameter .45 inch and .70 inch bailers, which are carefully extruded for straightness).
Material is clear, to assist in field sampling, that may require visual inspection of the sample taken. (Actually see the product sampled from ground water remediation wells and fuel tanks, for example).
Tested and approved, by established legal environmental testing firm, for leaching, absorption and over all performance. Results came in with A+ ratings for areas tested. Tested under Methods 8260 & 8260B
Material:
Tubing:Virgin medical grade Poly Vinyl Chloride. (Same medical grade PVC
resin used in the manufacturing of catheters, for treatment of medical patents.)
Tops and Bottoms:
ABS
Ball:
High grade PVC material.
Specially Designed Tops:
Allowing samples to be poured accurately, with little or no splashing
Strong ridged tethering attachment for secure fastening of bailer rope
Each part is press fitted and double welded, to assist in the bonding of tube to top device.
Specially Designed Bottoms:
Redesigned ball seat helps to deter sticking of ball, with out sample loss,
between ball and device.
Large .65 inch opening allowing for large volumes of product to rapidly fill the bailer with minimal disturbance to the sample. Also speeds up sampling and or purge time, thus saving money.
Each part is press fitted and welded, for little or no leaking between tube and bottom device.
For pricing contact us:- Phone 780-907-5375
- Fax 780-438-2585 or
- Send an email
